Processing needs to be cautious, this is not a casual statement. In the daily operation of CNC lathe processing, some places need special attention, otherwise, a little carelessness will cause injury. Therefore, no matter which step is in the operation, there are some places that need special attention, and these places that need attention will be known by the following.
The things that need to be paid attention to in the daily operation of CNC lathe processing are:
1. Check whether the spindle is in good condition when starting up, check whether the tool holder is firm, and see whether the tool is damaged. This is the responsibility of the product;
2. When the machine is running, remember not to open the protective plate, because when processing the product, in order to prevent sparks, the cutting fluid will be opened. Once the protective plate is opened, it will splash itself, and there may be iron slag flying. out;
3. The placement of the measuring equipment. During processing, avoid the collision of the measuring equipment. Because of the material, the measuring equipment is easy to be damaged. Therefore, it must be handled with care and can not be placed at will. The specific area should be carried out according to the requirements. place.
If you don’t say more, just look at these few, have you ever taken precautions. These are all necessary common sense in CNC lathe processing, and they are all linked to their own safety, so be sure to keep these precautions in mind. When processing a product, you must clean up the iron slag in the lathe in time. Remember, you must wear gloves when cleaning the iron slag, because the iron slag is very sharp, and a little carelessness may leave you wounds. The above are some basic precautions during processing, and we must remember that no detail should be missed.
Post time: Oct-22-2021